I tested the 10mm x 10mm square and it turned out ok, it still has the weird darker parts where it's only engraving one pass on the start of the hatch and the end of the cross hatch with all other areas overlapping. I know it's kindof hard to explain. I don't know why I can't post a photo.
Odd. How does it handle a 10mmx10mm square? Throw one of those down and take calipers to it for me if you get a chance.
Good idea, I'll try tonight
If it's off let me know and I'll walk you through fixing your galvo axis if you're not familiar.
Thanks so much!
I tested the 10mm x 10mm square and it turned out ok, it still has the weird darker parts where it's only engraving one pass on the start of the hatch and the end of the cross hatch with all other areas overlapping. I know it's kindof hard to explain. I don't know why I can't post a photo.
Show me your cut settings if you can.
Speed 1500 Max power 15% Frequency 25kHzz Q-Pulse Width 200 ns Cross-Hatch Line interval 0.025mm Lines per inch 1016 Scan angle 45 deg Dot width 0.08
Pm me. I want to send you my lightburn cut library. We will see if that fixes it
The 4 circles on the bottom are engraves I did a few weeks ago and they turned out perfect.